Gold/Silver Jewelry/Ornament Vacuum-Pressurized Casting Machine for Lost-Wax Work, 380V Three-Phase 4kW
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
Equipment Supply Voltage380V
-
machine typeJewlery Casting Machineryvideo outgoing-inspectionProvided
-
machinery test reportProvidedcore componentsEngine, Pump
-
voltage380Vpower(w)4KW(5.36hp)
-
dimension(l*w*h)90x68x145cm(35.43x26.77x57.09in)warranty2 Years
-
key selling pointsEasy to Operateweight (kg)150
-
Voltage380V ± 10%, 50/60Hz, 3 PhasePower4KW
-
Exhaust speed15L/SMax pressure6.0X10^-2
-
Dimensions90x68x145cmMax Capacity5 pcs of 4*9nches flasks
-
Motor speed1400rpm/minMixing time settingAvailable
-
Vacuum time settingAvailableWater auto feedingAvailable
Vacuum-pressurized machinery is offered for gold/silver jewelry and ornament lost-wax casting inquiries. Electrical references are 380 V ±10%, 50/60 Hz, three-phase supply and 4 kW, also referenced as 5.36 hp. Mixing-time and vacuum-time settings and automatic water feeding are available for the selected workflow.
Electrical setup and equipment dimensions
Review the actual machine configuration against its supply and operating requirements. Dimensions are 90 × 68 × 145 cm in length × width × height order, also referenced as 35.43 × 26.77 × 57.09 inches. Confirm the drive and pump configuration and included equipment for the intended jewelry-casting setup.
Exhaust speed and flask-capacity selection
The exhaust-speed reference is 15 L/s, and maximum capacity is referenced at five flasks. Confirm the exact unit and geometry behind the 4 × 9 flask-size designation before establishing fit. The pressure reference is 6.0 × 10^-2, with its unit and measurement basis to be agreed. These details should address the actual unit and the process it will perform.
Timing, water feed and operating references
Mixing-time and vacuum-time settings can be defined for the selected task, alongside the available automatic water-feeding function. For the 1400 rpm/min motor-speed reference, confirm the intended notation and operating basis. Agree the actual metal and process conditions with the unit's operating specification so its controls and required acceptance address the chosen jewelry or ornament workflow.
Inspection evidence for the selected machine
Outgoing-inspection video and a machinery test report are available for this vacuum-pressurized equipment inquiry. Define the evidence required for the actual configuration and operating scope. Relate the supplied machine, flask fit, process references and settings to the intended task, with its application acceptance established before selection.
