CUSTOM MANUFACTURING · PROJECT REVIEW
Custom Bronze Sculpture Casting from Original or Authorized Models
A bronze sculpture starts with the approved artwork, scale and finish. Relia reviews the lost-wax casting and finishing scope with the model, joining boundaries and base interfaces, so the delivered object follows an agreed visual and technical reference.
RELIA · PRODUCT AND MANUFACTURING SUPPORT
Start with the model and authorized design
Relia's sculpture range includes custom-size lost-wax bronze work, patina options and protective wooden-crate packing. References include a 1.8 m figure and a 120 cm eagle. Relia's enquiry connects the approved artwork to the scale, joints, base and selected surface, giving project buyers a clear set of stages to review before final delivery.
| Your requirement | Relia product and service scope |
|---|---|
| Route | Lost-wax bronze casting with finishing/patina |
| Scale references | 1.8 m figure and 120 cm eagle; custom sizes |
| Design inputs | Authorized model, scale, finish and base/installation interface |
| Packing | Project-specific wooden crate and protected support points |
02 · ARTWORK
Retain the details that define the sculpture
- Defining detail
- Mark important features, texture and surface areas.
- Approval reference
- Use the authorised model and agreed sample.
Mark the features, texture and surfaces that need particular attention. A photographic reference helps the discussion, while the agreed model and sample establish the actual acceptance basis.
Technical notes
Review sectional construction, joins, base connection and access for handling. Brown, black and green patina references describe appearance choices; use a sample or approved visual reference for the actual finish. Structural support and anchoring need a defined installation design rather than assumptions from a display photograph.
MANUFACTURING ROUTE · FEATURES AND CONTROL
Carry the Approved Model Into Joined and Finished Bronze
The approved model leads to the pattern/mould route and the wax sections required for casting. Spruing and the investment or shell system prepare those forms for bronze casting. After mould removal, the cast sections are cleaned, joined where required and worked to recover the agreed detail across seams. Relia's finish scope then defines polishing, patina and any selected protection. Model, representative detail and finish approvals are useful before final packing, because a completed patina or joined large object is harder to revise than the early model.
- Approve artwork and scaleAuthorized model, detail and installation concept
- Prepare patterns and castWax sections, mould system and bronze
- Join and finishSeams, surface detail and approved patina
- Prepare deliveryBase interfaces, support points and protective crate
04 · PROPORTIONS
Review the sculpture as a complete object
- Complete object
- Review visible form at the intended scale.
- Supplied boundaries
- Identify seams, separate pieces and assembly scope.
Confirm the visible form and viewing expectations at the intended scale. Include seams, separate pieces and any assembly boundaries in the project discussion rather than leaving them implicit in a single photograph.
05 · PROJECT INTERFACES
Coordinate the base and installation interfaces
Approve model, cast detail, joined areas and patina at agreed stages. The references use wooden crates with soft internal protection; specify support points and lifting needs for the actual artwork. Weathering and maintenance depend on the exposure and finish, not a blanket permanence claim.
06 · OVERSEAS DELIVERY
Plan protection around the approved artwork
- Supported artwork
- Agree support points and surface protection.
- Delivery definition
- Plan packing around the actual geometry and route.
Agree support points, surface protection and the required delivery information. Packing and shipping scope should address the actual sculpture geometry and route, with responsibilities visible in the order.
07 · ORDER CONTROL
Approve artwork and delivery on one record
Retain the model revision, material, finish sample and supplied interfaces together. Include the agreed inspection views, packing and delivery scope so later changes remain traceable to the approved project.
Technical notes
Provide the model or artwork, overall dimensions, viewing context and preferred patina. Identify details that must survive enlargement, casting, joining and polishing. For larger work, agree the model approval before metal production so proportional corrections remain practical.
| Project record | Retain |
|---|---|
| Artwork | Authorized model, scale and revision |
| Casting | Material, patina and agreed checks |
| Delivery | Interfaces, packing and supply scope |
RELIA · YOUR NEXT PROJECT
Share the model and the intended sculpture project
Send the authorized model, dimensions, material and finish references. Add base interfaces, inspection and delivery requirements. We can review the bronze sculpture enquiry around the artwork and the actual supplied scope.
Start with these project details
- Authorised model and dimensions
- Material and finish references
- Base and assembly interfaces
- Inspection and delivery requirements
Shuyuan Road, Qingdao, Shandong, China
