CUSTOM MANUFACTURING · PROJECT REVIEW
Castable Jewelry Resin for a Defined Printer and Burnout Workflow
A castable resin must work with the printer and the later investment process. Relia reviews the identified formulation, representative jewellery pattern and post-processing route, connecting print approval to an agreed burnout and casting trial.
RELIA · PRODUCT AND MANUFACTURING SUPPORT
Identify the printer and jewelry pattern
Relia's high-wax resin reference lists SLA/DLP/LCD printer categories, green/yellow options, density of 1.05–1.18 g/cm³ and 64–68 Shore D hardness. Relia's enquiry connects those item data to the actual printer and pattern. The selected formulation's exposure and post-processing information is reviewed separately from its compatibility with investing and casting.
| Your requirement | Relia product and service scope |
|---|---|
| Printer categories | SLA / DLP / LCD; exact model and wavelength to confirm |
| Listed density | 1.05–1.18 g/cm³ |
| Listed hardness | 64–68 Shore D |
| Validation chain | Print settings, cleaning/post-processing, investment and burnout |
02 · RESIN DATA
Review formulation-specific printing information
- Printer setup
- Confirm model, wavelength and exposure guidance.
- Selected resin
- Use formulation-specific information for the actual machine.
Confirm the exact resin and its applicable printer, wavelength and exposure guidance. Broad SLA, DLP or LCD descriptions do not establish a suitable setting for every machine.
Technical notes
The source's 99.9% purity field is not interpreted as wax content. Its viscosity unit is ambiguous and is not repeated as a validated value. Request current formulation data and exposure/post-processing guidance rather than transferring a recipe from another brand or resin colour.
MANUFACTURING ROUTE · FEATURES AND CONTROL
Connect Printing and Post-Processing to Clean Pattern Removal
The prepared design is printed using settings for the selected resin and machine, then cleaned, dried and post-processed under that formulation's instructions. Support removal must preserve the small details that matter to the finished jewelry. Relia's casting-material review then connects the pattern to an appropriate investment and burnout cycle before metal casting. A strong print alone does not prove compatibility: pattern expansion and removal behaviour affect the mould. The trial therefore follows both the printed geometry and the final casting result.
- Match printer and resinModel, wavelength, layer and geometry
- Prepare the printed patternCleaning, support removal and instructed post-process
- Match investment and burnoutFormulation-specific mould/removal route
- Review the metal trialDetail, surface and final dimensions
04 · PATTERN
Connect post-processing to pattern approval
- Post-processing
- Define applicable cleaning, curing and handling.
- Pattern approval
- Check representative features and finished printed dimensions.
Define cleaning, curing and handling from the applicable resin information. Approve representative features and dimensions before treating the printed result as ready for the intended casting workflow.
05 · DOWNSTREAM PROCESS
Review investment and burnout compatibility
Check printed dimensions, support marks and cleaning before a controlled casting trial. Record any required post-cure and the compatible investment/burnout cycle from the material guidance. A strong printed pattern can still leave an unsuitable mould if its expansion and removal behaviour are not matched to the investment.
- ResinIdentified material and printed pattern
- InvestmentSelected formulation and flask
- BurnoutApplicable material-process guidance
- TrialRepresentative casting approval
06 · PACKING
Retain material identity through delivery
- Supply identity
- Retain the selected resin and lot information.
- Repeat workflow
- Connect delivery records to the accepted casting trial.
Agree the pack size, required lot identification and applicable storage information. Keep resin supply records connected to the accepted pattern and casting trial for later purchasing.
07 · REPEAT ORDERS
Approve a material and workflow combination
Retain the resin, printer configuration, post-processing and casting trial basis. Review changes to those inputs rather than assuming one successful pattern proves every later combination.
Technical notes
Provide printer model, wavelength, layer height, pattern dimensions and the investment in use. Include thin detail, supports and the intended metal. Successful printing and clean burnout are separate requirements that must be qualified together for the selected formulation.
CONNECTED BUYING GUIDES
Continue with the next project decision
Follow the related component and purchasing guides, or open the catalogue reference to carry this requirement into a specific project enquiry.
RELIA · YOUR NEXT PROJECT
Send the printer and downstream casting requirements
Share the printer model, jewelry pattern, investment and current workflow. Add required documents, trial checks and quantities. We can review the resin enquiry around the actual printing and casting combination.
Start with these project details
- Printer model and pattern
- Resin and investment workflow
- Trial checks and documents
- Quantity and storage requirements
Shuyuan Road, Qingdao, Shandong, China
