Custom Equipment Carbon-Steel/304/316-Stainless Parts | Precision Investment Lost-Wax Casting and CNC Machining
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
NameStainless Steel Investment Lost Wax Casting Services
-
MaterialStainless steel,Carbon steelSurface treatmentNo cape burr sand hole
-
KeywordStainless steel precision castingQuality Control100% Inspection
-
Tolerance0.2mmMachining ProcessLost Wax+CNC Mechining
-
Lead Time15-35 DaysSurfacePerfect Appearance
Custom equipment-part inquiries cover carbon steel and 304 or 316 stainless steel through precision investment/lost-wax casting. CNC machining is part of the manufacturing direction, with a 0.2 mm tolerance reference and complete inspection for the selected component. Surface appearance is another consideration when defining the finished part.
Carbon steel or 304/316 stainless steel
Select the material required for the equipment component, including the exact grade and condition. The carbon-steel and stainless-steel directions should be matched to the actual function and operating environment. The component's mating geometry and important interfaces can then be considered with the material choice, keeping the casting inquiry tied to the intended equipment task.
Assigning the 0.2 mm dimensional reference
The tolerance reference is 0.2 mm, alongside lost-wax casting and CNC machining. Identify which dimensions it applies to and which surfaces require CNC completion. Agree the measurement and finished acceptance for those locations before settling the component scope, so the casting and machining requirements refer to the same defined geometry.
Surface appearance and part inspection
The surface direction targets a clean appearance without burrs or sand holes. Agree how those appearance requirements are assessed on the chosen component, including any areas important for fit or assembly. The quality-control scope includes 100% inspection of the equipment parts, with actual checks defined for their dimensions and surfaces. Those criteria connect the material, casting and CNC work to finished-part acceptance.
