Steel Pump/Valve Fittings | Lost-Wax Investment Casting, CNC Machining and Heat Treatment
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
Component FormFitting / JointSurface FinishShot Blasted
-
MaterialSteel
-
NamePump Valve Fittings Lost Wax Investment CastingKeywordspump fitting casting
-
ProcessLost wax investment casting+CNC machinedHeat TreatmentQuench and temper by 2 set mesh belt furnaces
-
Surface TreatmentShot blasting+AssemblingMachining Facility50+ Machining centers,80+ CNC machines
-
InspectionMT/UT/RT/100% visual+100%gage/CMMStandardASTM. AISI. DIN. BS. JIS. NF. AS.
-
CertificationIATF16949/ISO14001
Steel pump and valve fitting inquiries combine lost-wax investment casting with CNC machining. The actual fitting grade, geometry and interface requirements should be defined for the selected pump or valve arrangement. Quenching, tempering, shot blasting and assembly provide further work directions for that component.
Treatment and facilities for the steel fitting
For the steel fitting work, quench-and-temper processing uses two mesh-belt furnaces. Facility references also include 50+ machining centers and 80+ CNC machines for the machining discussion. Define the required treated condition, shot-blasted surfaces and assembly content alongside the casting and CNC dimensions, keeping the actual work scope connected to the fitting geometry.
Fitting inspection and standard selection
The fitting inspection direction specifies 100% visual checks and 100% gauge checks, alongside MT, UT, RT and CMM capabilities. Select the actual methods and acceptance criteria required for the component. Standard references are ASTM, AISI, DIN, BS, JIS, NF and AS; identify the applicable designation and steel grade with the dimensional and treatment requirements.
Pump or valve interface and intended service
Establish the mating interface and the operating conditions that the fitting must meet in the selected arrangement. Include any required medium, pressure and temperature acceptance in that component definition. Relate those requirements to the actual grade, treated condition, dimensions and inspection criteria, so the casting inquiry addresses a defined pump/valve fitting task and the finished acceptance needed for it.
