Custom 304/316 Stainless-Steel Door/Window Hardware Castings | Precision Investment/Lost-Wax and CNC
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
MaterialStainless steel
-
NameCasting Parts Investment Casting Lost Wax CastingSurface treatmentNo cape burr sand hole
-
ColorCustomKeywordStainless steel precision casting
-
Quality Control100% InspectionTolerance0.2mm
-
Machining ProcessLost Wax+CNC MechiningLead Time15-35 Days
-
SurfacePerfect Appearance
Custom door/window hardware uses 304 and 316 stainless-steel precision investment/lost-wax casting with CNC machining. The tolerance reference is 0.2 mm, and color is customized for the selected component. Appearance quality and attention to flash/burrs and sand holes are surface-acceptance directions for the hardware work.
304/316 grade and the door/window interface
Select the actual stainless grade and hardware geometry for the required door or window function. Identify the mating interfaces and the dimensions to be completed through casting and CNC. Connect those requirements to the selected component and its intended operating conditions, keeping material and finished geometry within the same hardware definition.
0.2 mm measurement and visible surfaces
Agree the dimensions and measurement basis to which the 0.2 mm tolerance reference applies. Set the custom color and visible-surface criteria for the selected hardware areas. The appearance direction should be assessed through actual acceptance for flash/burrs, sand holes, dimensions and surface condition, with those checks connected to the required component function.
Inspection for the custom hardware request
A 100% inspection direction applies to the requested casting parts, with checks and acceptance to define for the selected geometry. Relate that inspection to the cast/machined interfaces, color and visible-surface requirements. The actual grade, hardware dimensions, 0.2 mm measurement basis and appearance criteria together establish a specific door/window casting inquiry and the finished condition needed for it.
