OEM SS304 Low-Pressure Fuel and Oil Transfer Pump, Middle-Temperature Lost-Wax Casting and CNC Machining
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
Surface FinishSandblastedAlloy Grade304
-
applicationBiofuel IndustrypressureLow Pressure
-
Applicable temperature≤150°C
-
Control MethodFully Automatic Controlcustomized supportOEM
-
Impeller MaterialStainless Steel 304Max Flow Rate0.1 - 500 m³/h(3.53-17657.33ft3/h)
-
power sourceElectricSurface TreatmentSpraying, Sandblasting
-
MaterialStainless Steel, Stainless Steel 304ApplicationService Station, Fluid Control
-
CustomizationOEM
-
StandardsGB / ASTM / DIN / BS
-
Processing TechniquesMiddle Temperature Wax Casting, CNC MachiningSample ServiceYes
-
Gross Weight23Kg
This electric fuel and oil transfer-pump direction combines low-pressure operation, fully automatic control and an SS304 impeller. The selectable combination names a flow rate of 100 L/min (26.42 gpm) and maximum head of 30 m (98.43 ft). Biofuel-industry, service-station and fluid-control applications provide the context for a selected pump inquiry.
Flow and maximum head at the required duty
Review the flow/head relationship for the operating point the installation actually requires. The broader maximum-flow reference is 0.1–500 m³/h (3.53–17657.33 ft³/h), while the selectable combination is the specific 100 L/min and 30 m maximum-head direction. Keep those scopes separate when agreeing the pump duty and the acceptance of the chosen configuration.
Fluid temperature and automatic control
The applicable temperature is ≤150°C, and the pressure direction is low pressure. Identify the actual fuel, oil or biofuel composition and the operating conditions within which the pump will be considered. Electric power and fully automatic control are part of the offering; the installation's supply and control requirements should be agreed for the actual pump rather than inferred from those general descriptors.
SS304 impeller and casting process
Stainless steel and SS304 are material directions, with SS304 specifically identified for the impeller. Processing includes middle-temperature lost-wax casting and CNC machining. The middle-temperature term describes the wax-casting process, while the fluid-temperature requirement is the separate ≤150°C limit. Spraying and sandblasting are surface-treatment directions to review for the selected component.
OEM scope and sample review
OEM customization and sample service are available. Specify the applicable requirement from the GB, ASTM, DIN or BS standard families for the relevant component, together with its required duty and installation conditions. That gives the sample and customization discussion a concrete pump configuration to assess.
