OEM Custom DN100 Valve Body Lost-Wax Casting, 1.4408 German-Standard and 316 Stainless Steel References
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
Component FormValve BodySurface FinishPlated
-
MaterialStainless Steel
-
Surface treatmentCustomers' DemandProduct nameCustom Casting Parts
-
ProcessCasting +Machining(if Need)+surface TreatmentQuality ControlStrictly 100% Inspection
-
Lead Time20-35 DayMOQ1 Piece
-
PackageBubble Bag+ Carton+ Wooden BoxFinishZinc Plated
-
NameOEM Casting Processing Products
A custom DN100 stainless-steel valve body can be discussed through this OEM lost-wax casting service. Material references include 1.4408 in a German-standard direction and 316 stainless steel, with the exact requirement defined for the selected body. Machining is available if needed, and the minimum is one piece.
DN100 connections and the actual body drawing
Establish the body geometry, valve connections and mating interfaces for the intended assembly. The DN100 designation belongs with those dimensions when reviewing the proposed casting. Define the particular material specification against the same drawing so the technical references lead to an agreed requirement for that body.
Zinc plating in the surface discussion
Zinc plating is a finish direction, alongside surface treatment to customer demand. Consider it against the chosen body material, the areas being finished and the service conditions it must address. The surface inquiry should state its acceptance requirements and the relevant operating environment for the actual valve component.
Optional machining and body inspection
Machining can follow casting where the body needs further work. Identify the interfaces and dimensions affected by those operations, then agree their final acceptance. Inspection covers 100% of these custom valve bodies, with the applicable material, dimensional and surface checks defined for the component.
Defining duty for a one-piece inquiry
Specify the operating medium, pressure, temperature and required acceptance for the proposed body. These conditions belong with the drawing, connections, material and finish when reviewing suitability. The one-piece minimum allows the OEM discussion to start from a precisely defined valve-body request.
