Heavy-Duty Marine Hardware Castings | High-Precision Lost-Wax Boat Fittings and Industrial-Pump Components
Let’s define your requirement
Send a product link, drawing or short brief. We’ll work through the details with you.
- Confirm the specificationGrade or model, size and intended use.
- Define your orderQuantity, finish or configuration, and samples.
- Agree the quotation scopeIncluded work, key checks and delivery needs.
-
Component FormFitting / JointSurface FinishSandblasted , Polished
-
Alloy Grade316 , 304
-
Surface TreatmentSandblasting, electrolysis, polishing, spraying
-
MaterialsStainless steel 304 316 2205/Iron/Ti/GG20 GG25Product namelost wax from investment sand casting services
-
Materialstainless steel//Iron/GG20 GG25 GJL200 GJL250ProcessCasting +Machining(if Need)+surface Treatment
-
CertificationISO9001/TS16949/RoHSKeywordCustomized Precision Casting products
-
Quality Control100% InspectionDelivery timeWithin 60days
-
Weight2g-100KGLogoAccept Custom Logo
-
OEM/ODMWarmly Welcomed
Marine hardware, boat fittings and industrial-pump components are directed to high-precision lost-wax casting with a qualitative heavy-duty use direction. Material references include stainless 304, 316 and 2205, iron, Ti, GG20, GG25, GJL200 and GJL250. Investment or sand route and optional machining/surface work are selected for the actual component.
Boat fitting or pump duty and geometry
Identify the actual marine-hardware, boat-fitting or industrial-pump component and its intended service conditions. Define the required material grade, geometry and mating interfaces, then select the investment/lost-wax or sand route and any machining needed. The heavy-duty direction should be connected to the actual operating requirements and finished acceptance for that component.
Four finishes with OEM/ODM and logo scope
Sandblasting, electrolysis, polishing and spraying are surface-treatment directions. OEM/ODM work and custom-logo requirements are supported for the selected part. Agree the applicable material, finish areas and logo content/location with the geometry, so the custom appearance and processing requirements describe the actual fitting or pump/marine component requested.
Inspection tied to the selected component
The marine/pump casting quality direction calls for 100% inspection, with actual checks and acceptance criteria to agree for the part. Relate those checks to the grade, cast dimensions, optional machined interfaces and finished/logo areas. Include the component's actual service conditions with that inspection definition, so dimensional and surface acceptance address the requested boat fitting, marine hardware or industrial-pump task.
